Thanks to the ability to compensate for rotation or twisting of the rubber hose, avoiding damage to, the joints rotary hydraulic they are often used in hydraulic systems where there is a connection between a tube and a rigid part. The hydraulic couplings swivel Oleoweb GGIL represent the best choice in systems in which the flexible portion and a rigid are aligned axially. The swivel joints are not suitable rotations rapid and continuous: it is recommended that you consult the relevant page of the catalog to verify the parameters of applicability. The range GGIL includes sizes from 1/4 BSPP up to 1” BSPP, for maximum operating pressures up to 400 bar static and 200 bar in rotation in relation to the size of your choice. The operating ranges recommended can go up to 180 lpm always in function of the size of the joint. The components of the swivel joints GGIL are made of high-strength steel, hardened and ground worm in the sliding surfaces. The treatment of zinc coating protects exterior surfaces from corrosion.
The use of the joints rotary oleodinamicthe is often related to a connection between a flexible and a rigid part, thanks to their ability to compensate for rotation or twisting of the rubber hose, without it being damaged. The hydraulic couplings swivel Oleoweb GG90 they are used for fittings in lines with angles 90°. These joints are not suitable rotations rapid and continuous: for the parameters of its application, it is recommended to consult the relevant page of the catalogue. The range GG90 includes sizes from 1/4 BSPP up to 1” BSPP, for maximum operating pressures up to 400 bar static and 200 bar in rotation in relation to the size of your choice. The operating ranges recommended, always in relation to the size of the joint, can reach up to 180 lpm. The components are made of high-strength steel, hardened and ground worm in the sliding surfaces. The outer surfaces are protected from corrosion by galvanizing.
