Thanks to the control valves flow STB-BSPP you can adjust the oil flow in crossing and the speed control of a hydraulic actuator such as a cylinder or a motor. The adjustment is bi-directional. The valves are equipped with hydraulic compensator integrated and the regulated flow is a function of the pressure drop with its two heads. Through the two mouths threaded BSPP-GAS, the valves can be easily installed in-line within the hydraulic system. In function of the size chosen, the valves STB-BSPP can be installed in systems with pressure the maximum exercise of 400 bar and flow rates up to 300 lpm. The outer body is made of steel and is protected from corrosion by galvanizing. The internal components are also made of steel, hardened and rectified where necessary. The leaflets are made of aluminum. Are available on request flyers in plastic for applications that prohibit the use of aluminum components.
Thanks to the control valves flow STB-NPTF, it is possible to regulate the flow of oil in crossing and the speed control of a hydraulic actuator such as a cylinder or a motor. The adjustment is bi-directional. The valves are equipped with hydraulic compensator integrated and the regulated flow is a function of the pressure drop with its two heads. Through the two mouths threaded NPTF-GAS, the valves can be easily installed in-line within the hydraulic system. In function of the size chosen, the valves STB-NPTF can be installed in systems with pressure the maximum exercise of 400 bar and flow rates up to 300 lpm. The outer body is made of steel and is protected from corrosion by galvanizing. The internal components are also made of steel, hardened and rectified where necessary. The leaflets are made of aluminum. Are available on request flyers in plastic for applications that prohibit the use of aluminum components.
The valves of the series VBRF includes flow regulators bi-directional the two-way run to the sleeve. The oil flow is adjusted in both directions of the crossing. The valves do not have a compensator integrated, therefore the amount of flow that passes through will be in function of the jump in pressure at the two ends. The mouths F/F threaded BSPP-GAS allow for in-line installation of the valves VBRF within a hydraulic circuit. A typical application is the installation of the valve downstream of the shut-off valve to control the speed of movement of a cylinder. In function of the size chosen, the valves VBRF can be installed in systems with operating pressures up to 350 bar and flows up to 200 lpm. The external components of the valves VBRF are made of high-strength steel and protected from corrosion by galvanizing. Is available on request surface treatment of Zinc-Nickel alloys for applications in corrosive environments.
Thanks to the control valves flow STU-BSPP it is possible to regulate the flow of oil in crossing and the speed control of a hydraulic actuator such as a cylinder or a motor. The setting is one-way: in the opposite direction the flow is free. The valves are equipped with hydraulic compensator integrated and the regulated flow is a function of the pressure drop with its two heads. Through the two mouths threaded BSPP-GAS, the valves can be easily installed in-line within the hydraulic system. Depending on the size of the valves STU-BSPP can be installed in systems with pressure the maximum exercise of 400 bar and flow rates up to 300 lpm. The outer body is made of steel and is protected from corrosion by galvanizing. The internal components are also made of steel, hardened and rectified where necessary. The leaflets are made of aluminum. Are available on request flyers in plastic for applications that prohibit the use of aluminum components.
Thanks to the control valves flow STU-NPTF, it is possible to regulate the flow of oil in crossing and the speed control of a hydraulic actuator such as a cylinder or a motor. The setting is one-way: in the opposite direction the flow is free. The valves are equipped with hydraulic compensator integrated and the regulated flow is a function of the pressure drop with its two heads. Through the two mouths threaded NPTF-GAS, the valves can be easily installed in-line within the hydraulic system. In function of the size chosen, the valves STU-NPTF can be installed in systems with pressure the maximum exercise of 400 bar and flow rates up to 300 lpm. The outer body is made of steel and is protected from corrosion by galvanizing. The internal components are also made of steel, hardened and rectified where necessary. The leaflets are made of aluminum. Are available on request flyers in plastic for applications that prohibit the use of aluminum components.
